Information About Reading Off Parameters
Before the control module is replaced it is vital that the programming is read off the old combined instrument panel.
Read off the programmed values in the old control module. Note the values.
If it is not possible to read off the values, consult the either the manager, the sales company or the customer so that the new control module is programmed with the same values as the old control module.
Reading off is divided into two sections; one section for the parameters that can be programmed and one section for the parameters that are factory programmed or programmed by the manufacturer.
Select one of the following functions:
- Read off the customer programmed values, instruments only calibrated in kilometers. Refer to Checking the programmed values, calibrated only in kilometers
- Read off the customer programmed values, instruments calibrated in both miles and kilometers. Refer to Checking the programmed values, calibrated in both miles and kilometers
- Read off the factory programmed values. Refer to Checking the factory programmed values
- Finish reading off. Refer to Information