Replacing Shock Absorber

Position a mobile jack under trailing arm and lift up 

Fig 1: Press Up Trailing Arm

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install shock absorber on lower mounting 

Tighten shock absorber nut to 80 Nm  .

Tighten upper shock absorber mounting screws to 25 Nm 

Fig 2: Identifying Clips

Courtesy of VOLVO CARS OF NORTH AMERICA.

Reinstall: 

• front edge of panels with clips
• backrest catches. Use thread sealant. Tighten to 20 Nm  .
• cover plate and cargo compartment carpet.