Install the flame trap (Later version)

Fig 1: Identifying Hoses And Clamps

Courtesy of VOLVO CARS OF NORTH AMERICA.

Connect the two flame trap hoses to the cylinder block connecting sleeves.

Install a new  hose clamp for the upper hose. Tighten the lower clamp.

Install and tighten the screws to 20 Nm  .

Install the intake manifold bracket loosely with the lower screw.

Fig 1: Identifying Hoses And Clamps

Courtesy of VOLVO CARS OF NORTH AMERICA.

Connect the two flame trap hoses to the cylinder block connecting sleeves.

Install a new  hose clamp for the upper hose. Tighten the lower clamp.

Install and tighten the screws to 20 Nm  .

Install the intake manifold bracket loosely with the lower screw.