Checking display activation

Fig 1: Identifying Ignition On Position

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition off.
• Connect Volvo Scan Tool (ST) to the adapter box and wiring.
• Connect Volvo Scan Tool (ST) to the data link connector (DLC).
• Ignition on.

  Turn on power supply using the switch on the adapter box.

  Check the Volvo Scan Tool (ST) display.

Does the display light? 

• YES 

  Refer to Fault-tracing information 

• NO 

  Refer to Try a new Volvo Scan Tool (ST)