Doors & Lids, Lighting, Window - Adjustment, Removal & Installation (Convertible)

• Body And Interior
  • Removing rivet
  • Visual and physical check
  • Wiring up for voltage measurement
    • Wiring up
    • Connecting wiring
• Doors & Lids
  • Replacing fuel tank filler cover motor
  • Side door front assembly, adjusting
    • Notes
    • Step 1
      • Adjusting the base of the door mirror
      • Final requirements for the base of the door mirror
    • Step 2
      • Adjusting the front power window lift mechanism cassette
    • Step 3
      • Turning/twisting front side door
      • Final requirements for turning/twisting
    • Step 4
      • Centering lock facing in door lock
    • Step 5
      • Adjusting the pre-tension of the side window
    • Step 6
      • Adjusting clearance between side window and door seal
    • Final check
      • Checking final requirements
• Lighting
  • Replacing tail lamp assembly
    • Notes
    • Position of bulbs
    • Replacing tail lamp bulbs
• Window
  • Removing glass splinters
    • Removal
      • Broken glass from the windshield or front side window
      • When cleaning defroster
      • When cleaning ventilation ducts
  • Window front side door, adjusting
    • Notes
    • Important information
    • Changing glass clamp screws
    • Adjusting side window
    • Adjust pressure against weatherstrip front side window
    • Shim adjustment of front side window
    • Final adjustment of front side window