System settings (customer settings), European market
The following system settings in the control module can regain the base values if the control module power supply fails, when the control module or the battery are changed for example. A new control module is always delivered with the base values set. After the control module is connected, or the power supply returned, the control module settings should be adjusted to the previous market and customer settings.
- Ignition on
- Select Setup with remote control.
- Select Language, System settings and Traffic information to change settings.
| Parameter | Setting, choice |
|---|---|
| Volume: | Off/Min/Med/Max Base value=Med |
| Language: | English/Deutsch/Italiano/Nederlands/Svenska/Francais/Espanol Base value= English |
| Distance unit | km / miles Base value= Km |
| At top of map | North/Direction of travel Base value= North |
| Detailed intersection map | ON/OFF Base value= On |
| Display help text | ON/OFF Base value= On |
| Mark road driven | ON/OFF Base value= Off |
| Text Names of hotels, restaurants etc |
ON/OFF Base value= On |
| Map symbols Symbols for hotels, restaurants etc |
ON/OFF Base value= On |
| Screen saver | ON/OFF Base value= Off |
| Time (compensating from GMT) | +/- Base value= 1994-01-01 Before it registers GPS signals the new control module starts the date at 1994-01-01. This also applies to a control module left unpowered over a long period. |
| TMC-filter | Setting which TMC messages should be displayed. Different symbols depending on message type. |
| TMC-channel | If several channels send TMC it is possible to choose which one to use. |