Checking connectors and cables
Check the CD-ROM player connector for contact resistance and oxidation according to Contact resistance and oxidation .
Check the cable between the CD-ROM player terminal 16 and fuse 15, and the cable between CD-ROM player terminal 7 and fuse 30 for an open-circuit according to Open-circuit, permanent faults .
Remedy as necessary.
Other information:
- To access/replace the CD-ROM player, see Replacing, CD-ROM player .
- For connecting breakout box, see Connecting the breakout box .
Was a fault detected?
- YES
OKAY: Troubleshooting has been completed.
- NO
FAULT NOT FOUND: Troubleshooting has been completed.