Removal & Installation: Inspection
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 1998 Volvo V90, 1998 Volvo S90, 1997 Volvo V90, 1997 Volvo S90, and 1997 Volvo 960. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
DO NOT turn crankshaft or camshafts while belt is removed.
Spin tensioner and idler pulleys and listen for bearing noise. See Figure. Ensure pulley surfaces in contact with belt are clean and smooth. Check tensioner pulley arm and idler pulley mountings, and tighten bolts as necessary. See TORQUE SPECIFICATIONS . Check tensioner for signs of leakage, no resistance when depressed, or a plunger that cannot be depressed.