Fault-tracing information

• Remedy as necessary.

Select "Continue" when the fault has been remedied. 

• Continue 

  Refer to Fault-tracing information 

• Remedy as necessary.

Select "Continue" when the fault has been remedied. 

• Continue 

  Refer to Fault-tracing information 

Fault-tracing shows that the fault is no longer occurring. The symptom was probably caused by an intermittent fault.

Do not carry out verification after fault-tracing this symptom.

The information can be displayed again or fault-tracing this fault can be interrupted.

Do you want to display information again? 

• YES 

  Refer to Checking for air leakage in the intake system 

• NO 

  OKAY:  Troubleshooting has been completed.

• Try a new idle air control (IAC) valve.

Select "Continue" when the fault has been remedied. 

• Continue 

  Refer to Fault-tracing information