Installing Charge Air Hose

Install: 

• The auxiliaries belt. Use 9997109
• The connector with holder on the power steering pump
• The servo reservoir in its mounting on the expansion tank
• The hoses in their holders and clips
• The tie strap for the servo hose at the suspension turret.

Fig 1: Identifying Charge Air Hose

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install: 

• The charge air hose on the charge air cooler (CAC)
• The screw for the charge air pipe above the engine and clamp for power steering pump delivery lines from the intake manifold
• Cold air inlet hose to the control module.

Check the level in the servo reservoir and top up if necessary.

Connect the negative battery lead.Battery, disconnecting

Start the engine and check for leakage.