Connecting the breakout box to the combined instrument panel

Fig 1: Identifying Ignition Off Position

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Control Module Disconnected

Courtesy of VOLVO CARS OF NORTH AMERICA.

Ignition off.
Expose combined instrument panel according to Preparations .
Disconnect combined instrument panel.
Check that the male and female terminals in the combined instrument panel and cable harness connectors are intact and secure and that the wiring to the female terminals is properly attached to the terminal.
Check the terminals relevant to the diagnostic trouble code (DTC)/symptom especially well.
Connect adapter 9813194 to combined instrument panel connectors A and B and connect the breakout box 9813190 to adapter.

Fig 3: Identifying Breakout Box And Instrument Panel Connectors A And B
Courtesy of VOLVO CARS OF NORTH AMERICA.