Checking 15 supply
Check fuse 11C/10 in the integrated relay/fusebox in engine compartment. Replace if necessary.
Check cable between:
- fuse holder 11C/10 (rear terminal) and the ignition switch #30
- ignition switch #15A and fuse holder 11C/3, (rear terminal)
- fuse holder 11C/3 (rear terminal) and combined instrument panel #A18.
for an open-circuit according to Open-circuit, permanent faults .
Other information
- To connect the breakout box, see Connecting breakout box, Combined instrument panel .
Select "Continue" when the fault has been remedied.
- Continue
Refer to Verification