Seat Belt (Inertia) Reels And Seat Belt Tensioners
WARNING: This page is about a different variant/trim than selected.
- 2 M14 seat belt reel screws.
When installing, tighten to 40 Nm
- 1 Torx 30 seat belt tensioner screw.
When installing, tighten to 6 Nm .
WARNING:
Under no circumstances use an ohmmeter or other live measuring instrument to take readings on a disconnected non-deployed seat belt tensioner. This could deploy it.
WARNING:
The seat belt tensioner must never be taken apart, repaired or moved to another vehicle. For information about handling replaced seat belt tensioners, see Handling replaced SRS airbags/seat belt tensioners .