LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 1998 >> C70 2D Convertible, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Emission Control, Turbocharger - Removal, Replacement And Installation (Convertible) >> Check/Replacing Exhaust System (B5234T3; B5254T; 1998-1999) >> Exhaust manifold replacement, right-hand drive 850 >> Right drive shaft, reinstall >> Reinstall drive shaft in hub

Reinstall drive shaft in hub

Fig 1: Reinstalling Drive Shaft In Hub
GLL126001Courtesy of VOLVO CARS OF NORTH AMERICA.
NOTE: Apply metal adhesive 1161370 on the drive shaft splines (see illustration).

Fold out and twist the spring strut and locate the drive shaft in the hub.

Install a new drive shaft nut finger tight.

NOTE: Oil the threads and flange.
scientia non olet · About LEMON Manuals