Checking for an open-circuit

Check the cable between combined instrument panel terminal A17 and ground terminal 31/50 for an open-circuit according to Open-circuit, permanent faults .

Fig 1: Identifying Ohmmeter

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Continue 

  Refer to Information 

Check the cable between combined instrument panel terminal A10 and junction point 23/300 for an open-circuit according to Open-circuit, permanent faults .

HINT: For further information about the circuit, see the relevant Wiring Diagram Service Manual. 

Fig 1: Identifying Ohmmeter

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Continue 

  Refer to Verification