Retrieving & Erasing Codes: Notes
WARNING: This page is about a different car, the 1996 Volvo 850. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Never disconnect or connect ECM connector with ignition switch in ON position.
Follow tool manufacturer's instructions if retrieving or erasing codes with Volvo Scan Tool (998-8686 ) or generic scan tool. See TROUBLE CODE IDENTIFICATION table. Either scan tool must be connected to DLC located in console in front of gear shift lever. See Fig 1.
CAUTION:
Never disconnect or connect ECM connector with ignition switch in ON position.
Follow tool manufacturer's instructions if retrieving or erasing codes with Volvo Scan Tool (998-8686 ) or generic scan tool. See TROUBLE CODE DEFINITION table in DTC IDENTIFICATION. Either scan tool must be connected to DLC located in console in front of gear shift lever. See Fig 1.