LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 1995 >> 850 GLT, 4D Sedan, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Engine Controls - Adjustments - Non-Turbo) >> Throttle Controls >> Throttle Link Rod

Throttle Link Rod

WARNING: This page is about a different car, the 1996 Volvo 850. However, it is still accessible from the selected car via links, so may be relevant.
  1. Loosen throttle link lock nut so link is separated and can spring back easily to its innermost position. Mount link in position.
  2. Attach link end with ball and lock nut to throttle spindle. Ensure throttle spindle is in contact with adjusting screw "B" and pulley is seated against idle stop "C". Tighten link lock nut "A". Rotate pulley to ensure link seats against adjusting screw "B" before pulley seats against idle stop "C". See Fig 1 .
Fig 1: Adjusting Throttle Link Rod (850 Shown)
G94D44159Courtesy of VOLVO CARS OF NORTH AMERICA.
scientia non olet · About LEMON Manuals