LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 1995 >> 850 GLT, 4D Sedan, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Air Bag Restraint System) >> Self-Diagnostic System >> Clearing Codes

Clearing Codes

WARNING: This page is about a different car, the 1996 Volvo 850. However, it is still accessible from the selected car via links, so may be relevant.
  1. All fault codes must be displayed in order at least once before they can be cleared. Display of first code displayed, a second time, indicates all codes in memory have been displayed. Fault codes must be displayed during same ignition-on period before they can be cleared.
  2. Verify fault codes have been cleared by repeating retrieval steps. See RETRIEVING CODES . If more fault codes are displayed, record codes and repeat code retrieving procedure. Record these codes and repeat clearing procedure. If fault codes are still present, correct faults and repeat clearing code procedure. To ensure SRS fault codes are now cleared, perform SYSTEM OPERATION CHECK .
SRS FAULT CODES

Code (1) Fault
112 Sensor Module Fault
127 SRS Lamp, Open Circuit Or Short Circuit
128 SRS Lamp, Short Circuit To Supply
211 Driver-Side Air Bag, Short Circuit
212 Driver-Side Air Bag, Open Circuit
213 Driver-Side Air Bag, Short Circuit To Ground
214 Driver-Side Air Bag, Short Circuit To Supply
221 Passenger-Side Air Bag, Short Circuit
222 Passenger-Side Air Bag, Open Circuit
223 Passenger-Side Air Bag, Short Circuit To Ground
224 Passenger-Side Air Bag, Short Circuit To Supply
231 Left Belt Tensioner, Short Circuit
232 Left Belt Tensioner, Open Circuit
233 Left Belt Tensioner, Short Circuit To Ground
234 Left Belt Tensioner, Short Circuit To Supply
241 Right Belt Tensioner, Short circuit
242 Right Belt Tensioner, Open Circuit
243 Right Belt Tensioner, Short Circuit To Ground
244 Right Belt Tensioner, Short Circuit To Supply
(1) For corrective action of faults, see FAULT CODE TESTING.