Post-Collision Inspection
WARNING: This page is about a different car, the 1996 Volvo 850. However, it is still accessible from the selected car via links, so may be relevant.
See the AIR BAG/SRS COMPONENT INSPECTION & REPLACEMENT table.
POST-COLLISION AIR BAG SAFETY INSPECTION
| Instruction | Systems |
|---|---|
| Replace After Deployment | * Air Bag Module * Contact Reel * Crash Sensor * Seat Belt Tensioners (If Equipped) * Steering Wheel |
| Inspect & If Damaged, Replace Component (Even If Air Bag Did Not Deploy) | * Crash Sensor Mounting Bracket * Wiring Harness |
| Comments | * DO NOT attempt SRS wiring repairs. * If fault code 1 is displayed, the crash sensor must be replaced. |