LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 1985 >> 245 GLT, Automatic, AW71L >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> 2.1L Turbo, 2.3L & 2.3L Turbo >> Pistons, Pins & Rings >> Piston & Rod Assembly >> Removal

Piston & Rod Assembly: Removal

  1. Remove cylinder head, oil pan and oil pump. Be sure connecting rods and caps are properly marked, so they may be reinstalled in original location. Remove carbon ridge from cylinder bores.
  2. Remove rod cap, and using wooden hammer handle, push piston out top of cylinder bore. Reinstall rod cap on piston and rod from which removed.
scientia non olet · About LEMON Manuals