LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 1985 >> 245 GLT, Automatic, AW71 >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.3L 4-CYL (B230F) & 2.3L 4-CYL Turbo (B230FT) >> Removal & Installation >> Exhaust Manifold >> Installation

Exhaust Manifold: Installation

  1. To install, reverse removal procedure using new gaskets. If gaskets are marked with letters "UT", this side must face away from cylinder head.
  2. On turbo models, if turbo was removed, apply Thread Sealant (1161078-9) to turbo retaining bolts and install using new lock plates. Tighten in a criss cross pattern.
  3. Pour clean engine oil into turbo prior to installing oil supply line. When installing exhaust pipe on turbo, if studs were removed from turbo, apply Thread Sealant (1161035-9) to studs prior to installing into turbo housing.
scientia non olet · About LEMON Manuals