LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 1985 >> 245 GLT, Automatic, AW71 >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.1L Turbo, 2.3L & 2.3L Turbo >> Pistons, Pins & Rings >> Oil Pan >> Removal

Oil Pan: Removal

  1. Raise and support front of vehicle. Remove splash guard. Remove engine mount nuts from underside of crossmember.
  2. Disconnect steering shaft at steering gear. Remove steering "U" joint lower bolt, loosen upper bolt and slide "U" joint up on shaft.
  3. Position lifting tools (5006, 5033 and 5115) and lift engine slightly. See Figure. Take out crossmember bolts. Lower crossmember.
  4. Remove left engine mount. Remove support bracket (located between rear of oil pan and clutch housing). Remove oil pan bolts. Turn and lower oil pan.
scientia non olet · About LEMON Manuals