LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 1985 >> 245 GLT, Automatic, AW71 >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.1L Turbo, 2.3L & 2.3L Turbo >> Pistons, Pins & Rings >> Fitting Pistons

Fitting Pistons

Measure piston diameter at right angle to piston pin bore and 0.28" (7 mm) from lower edge for B21FT and 0.31" (8 mm) from lower edge on B23F engines. Measure cylinder bore at several positions. If difference exceeds clearance specifications, oversize pistons are available.

scientia non olet · About LEMON Manuals