LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 1985 >> 245 GLT, Automatic, AW71 >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> 2.1L Turbo, 2.3L & 2.3L Turbo >> Camshaft >> Timing Belt Installation

Timing Belt Installation

  1. Install belt tensioner if previously removed. Align notch in crankshaft belt guide with timing mark on front cover.
  2. Rotate intermediate shaft so timing mark on sprocket aligns with mark on belt guard. Align marks on camshaft belt guide with timing mark on valve cover.
  3. New drive belts have Yellow markings. Two lines should fit toward crankshaft marks and next mark toward intermediate shaft mark.
  4. Place belt over crankshaft sprocket first, then over intermediate shaft. Stretch belt on tension side and fit over camshaft sprocket. Slide back of belt inside tension roller.
  5. Loosen nut on belt tensioner to permit spring tension to act against drive belt. Recheck timing marks for proper location and tighten tensioner nut. Attach pulley to front hub on crankshaft.
scientia non olet · About LEMON Manuals