Intermediate Shaft: Inspection
Inspect bearing journals for damage. Check bearing I.D. and intermediate shaft bearing journal O.D. Ensure oil clearance is within specification. Replace components if not within specification. See INTERMEDIATE SHAFT SPECIFICATIONS table.
INTERMEDIATE SHAFT SPECIFICATIONS
| Application | In. (mm) | |
|---|---|---|
| Bearing I.D. | ||
| Front | 1.8512-1.8524 (47.020-47.051) | |
| Center | 1.6957-1.6969 (43.071-43.101) | |
| Rear | 1.6917-1.6929 (42.969-43.000) | |
| End Play | .0080-.0181 (.203-.460) | |
| Intermediate Shaft Journal O.D. | ||
| Front | 1.8494-1.8504 (46.975-47.000) | |
| Center | 1.6939-1.6949 (43.025-43.050) | |
| Rear | 1.6900-1.6909 (42.926-42.949) | |
| Oil Clearance | .0008-.0030 (.020-.076) | |