Cylinder Block Specifications

CYLINDER BLOCK SPECIFICATIONS

Application

In. (mm)

2.3L

Maximum Block Warp

n/a

Cylinder Bore

Standard Diameter

⁽¹⁾

Maximum Taper

n/a

Maximum Out-of-Round

n/a

⁽¹⁾	Cylinder bore diameter is indicated by letter stamped on deck surface. Bore diameter is as follows: Letter "C" - 3.7795-3.7799" (95.999-96.001mm). Letter "D" - 3.7799-3.7803" (96.001-96.019mm). Letter "E" - 3.7803-3.7807" (96.019-96.030mm). Letter "G" - 3.7811-3.7815" (96.039-96.050mm).