LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 1984 >> 245 DL, Automatic >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Suspension - Rear >> Removal & Installation >> Wheel Bearing >> Installation

Wheel Bearing: Installation

  1. Using oil seal adapter (5009) and oil seal driver (1801), drive new oil seal into axle housing. Using rear axle shaft bearing remover/installer (2838) and bearing adapter (5010), press new bearing and bearing retainer onto axle shaft.
  2. Install axle shaft to axle housing. Install 2 brake shoe retaining springs and 4 bolts to axle shaft bearing retainer. Torque bearing retainer bolts. To complete installation, reverse removal procedures.
scientia non olet · About LEMON Manuals