LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 1981 >> 244 GLT, Automatic Trans >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> VOLVO Engines - B21F & B21FT 4-Cylinder >> Camshaft >> Removal

VOLVO Engines - B21F & B21FT 4-Cylinder: Camshaft: Removal

  1. Remove valve cover and gasket. Check and note markings on camshaft bearing caps. Remove center bearing cap and install holder tool (5021) to hold camshaft in place while removing remaining bearing caps.
  2. Remove timing belt cover and slacken drive belt tensioner. Pull off drive belt and remove camshaft sprocket. Remove remaining bearing caps and take out front camshaft oil seal. Release screw on holder tool and lift out camshaft.
scientia non olet · About LEMON Manuals