LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 1967 >> 142 Eng CD B18D >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> VOLVO Engines - (4 Cylinder) >> 1963-73 VOLVO B 18B, B 18D & B 20 (544, 122, 140 & P-1800 Series) 4 Cylinder >> Engine Front Cover Oil Seal >> Removal & Installation

Removal & Installation

  1. Remove fan belt tensioner. Loosen stabilizer at frame. Screw out bolt in crankshaft, remove belt pulley. Remove circlip and take out washer and felt ring.
  2. Check correct casing fit by inserting 0.004" (.10 mm) feeler gauge in gap between casing and crankshaft hub. If feeler gauge jams at any point, casing must be recentered.
  3. Fit new felt ring, place washer in position and fit circlip. Check to ensure that circlip is properly in position. Fit remaining parts and tension fan belt.
scientia non olet · About LEMON Manuals