Glove Compartment With Instrument Panel Trim Panel, Removing And Installing
The glove compartment with instrument panel trim panel will be called the glove compartment in the information that follows.
The removing and installing is described as an example for a LHD vehicle.
-- Remove the instrument panel side cover. Refer to Instrument Panel Side Cover, Removing and Installing .
-- Remove the glove compartment. Refer to Glove Compartment Cover, Removing and Installing .
-- Remove the instrument panel decorative trim on the front passenger side. Refer to Instrument Panel Decorative Trim, Removing and Installing .
-- Remove the center vent. Refer to Center Vent, Removing and Installing .
-- Remove the driver side instrument panel cover. Refer to DRIVER SIDE INSTRUMENT PANEL COVER, REMOVING AND INSTALLING, LHD VEHICLES .
-- Remove the tunnel support cover. Refer to Tunnel Support Cover, Removing and Installing .
-- Remove the bolts -2-.
-- Remove the glove compartment -1-.
-- Disconnect the connectors.
Installing
Install in reverse order of removal while noting the following:
Tightening Specifications