Wiring Harness Repair Set - Hot Air Blower: VAS1978/14A
When heat-shrinking crimp connections, be careful not to damage any other wiring, plastic parts or insulating material with the hot nozzle of the hot air gun.
Always observe operating instructions of heat gun.
The Wiring Harness Repair Set - Hot Air Blower: VAS1978/14A is used together with the Wiring Harness Repair - Blower - Shrink Element: VAS1978/15A to heat-shrink the crimp connectors. After crimping, crimp connections must be heat-shrunk using hot air gun to prevent moisture penetration.
The Wiring Harness Repair Set - Hot Air Blower: VAS1978/14A is a component of the Wiring Harness Repair Set: VAS1978B and its previous versions.
Crimp connectors, heat-shrinking using the Wiring Harness Repair Set - Hot Air Blower: VAS1978/14A . Refer to WIRE BREAK WITH SINGLE REPAIR POINT or WIRE BREAK WITH DUAL REPAIR POINT .