Replacing the Tool Head:

-- Select the appropriate tool head based on the antenna wire test. Refer to Checking the antenna wire: .

-- Open the handle on the pliers all the way.

-- Release and remove both locking pins -arrows- from the handle.

Fig 1: Disengaging Crimping Tool Locking Pins

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Attach the necessary tool head to the handle from the top -arrow-.

Fig 2: Identifying Insertion Of Crimping Tool Head

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Insert the pins -arrows- into the handle in order to lock the tool head into place.

Fig 3: Engaging Crimping Tool Locking Pins

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.