Vehicle Diagnostic Tester, CONNECTING, GOLF MY 1998 THROUGH 2003

-- Apply the parking brake.

-- In vehicles with automatic transmission, move the selector lever to the "P" or "N" position.

-- In vehicles with manual transmissions, move the shift lever to the neutral position.

-- Remove trim -1- in direction of arrow.

-- With the ignition switched off, connect the Vehicle Diagnostic Tester with the Diagnostic Cable to the data link connector in direction of -arrow- in the vehicle.

Fig 1: Connecting Tester VAS 5051 To Data Link Connector Using Diagnosis Cable VAS 5051/1

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Switch the ignition on.

-- Switch off all electrical equipment.

NOTE:

Connecting all other and successive Vehicle Diagnostic Testers is done exactly the same as in the previously described sequence.