Fuse Panel B -SB-, REMOVING AND INSTALLING: Removing

-- Disconnect the ground cable from the battery when the ignition is switched off. Refer to BATTERY, DISCONNECTING AND CONNECTING .

-- Press the release buttons in direction of -arrow-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the cover -1-.

-- Release the mounting tab -2- using a screwdriver.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the front cover -1- in the direction of -arrow-.

-- Mark the wires at the threaded connections for reinstallation.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the nuts -1, 2, 4, 5 and 6-.

-- Remove the bolt -3-.

-- Free up the wires -arrow-.

-- Cut the lower cable ties on the wiring harness.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Release the catches -1, 2 and 4- in direction of -arrow-.

-- Remove the fuse panel B -3- and move to the side.