Relay And Fuse Panel Behind Instrument Panel, Removing And Installing: Removing
-- Disconnect the ground cable from the battery when the ignition is switched off. Refer to BATTERY, DISCONNECTING AND CONNECTING .
-- Remove the instrument panel. Refer to INSTRUMENT PANEL, REMOVING AND INSTALLING .
-- Release the mounting tab -2- and -4- in the direction of -A arrows-.
-- Remove the Fuse Panel C -SC- -3- in the direction of -arrow B- from the bracket -1-.
-- Remove the wires.
CAUTION:
- The exact assignment can be found the applicable wiring diagram. Refer to Wiring Diagram.
- If necessary, take photos of the assignment.