Start System Button -E378-, Removing And Installing: Removing
-- Remove the shift cover upward from the center console. Refer to the appropriate service information or SELECTOR LEVER HANDLE, REMOVING AND INSTALLING .
-- Push the Start System Button -E378- -1- out of the center console insert -2- from the bottom. The clips are opened at the same time.
-- Release and disconnect the connector.
If the Start System Button -E378- cannot be removed as described, then:
-- Remove the center console insert. Refer to CENTER CONSOLE INSERT, REMOVING AND INSTALLING .
-- Push the Start System Button -E378- out of the center console insert from the bottom.