Rear Seat Backrest Cover And Cushion, Separating: Installing
Install in the reverse order of removal while noting the following:
- Replace all upholstery clips and install at the same location.
Cover for Rear Seat Backrest without Pass-Through
-- Secure the clips in the sequence -1 through 13- for the 2/3 rear seat backrest.
-- Secure the clips in the sequence -1 through 9- for the 1/3 rear seat backrest.
-- Make sure the seat cover is not wrinkled.
Cover for Rear Seat Backrest with Pass-Through
-- Secure the clips in the sequence -1 through 9- for the 2/3 rear seat backrest.
-- Secure the clips in the sequence -1 through 9- for the 1/3 rear seat backrest.
-- Make sure the seat cover is not wrinkled.