Seat Pan Cover And Cushion, Removing And Installing: Removing

-- Remove the front seat. Refer to FRONT SEAT, REMOVING AND INSTALLING .

-- Secure the front seat to the : VAS6136 . Refer to FRONT SEAT, MOUNTING ON FIXTURE FOR SEAT REPAIR .

-- Remove the tunnel-side seat trim panel. Refer to SEAT TRIM PANEL, REMOVING AND INSTALLING .

-- Remove the sill-side seat trim bracket. Refer to SEAT TRIM PANEL BRACKET, REMOVING AND INSTALLING .

-- Release and remove the connector.

-- Free up the wiring harnesses.

-- Detach the molding strips -1- from the seat cover in the front and side areas using the : 3370 .

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Detach seat cover -2- of the seat cover in the rear area using the : 3370 .

-- Loosen the cover and cushion from the seat pan and remove carefully under the backrest forward -arrows-.

-- Remove the cover and cushion from the seat pan. Depending on the equipment version, guide the seat heating wiring harness out.