Driver Backrest Heating Element -Z7- /Front Passenger Backrest Heating Element -Z9-, REMOVING AND INSTALLING: Installing

Install in the reverse order of removal while noting the following:

-- Guide the wire -5- through the cable guide.

-- Align the heating element -2- on the cushion -1- at the same time do not remove the protective film.

-- Remove the protective films -4- one after the other from the adhesive tape -3- without damaging the heating elements.

-- Glue the heating elements so that they align with the old heating elements and are free of wrinkles.

-- Route the connections to the individual heating elements in the base of the gaps.