Outer Rear Three-Point Seat Belt, Removing And Installing: Removing
-- Remove the C-pillar trim panel. Refer to C-Pillar Trim Panel, Removing and Installing .
-- Remove the outer rear belt end fitting. Refer to OUTER REAR BELT END FITTING, REMOVING AND INSTALLING .
-- Disconnect the battery ground cable. Refer to BATTERY, DISCONNECTING AND CONNECTING .
-- Remove the bolt -4-.
-- Rear the outer rear three-point seat belt -2- from the mount -1- in the direction of -arrow-.
CAUTION:
Pyrotechnical components can deploy unintentionally.
Risk of injury.
- Discharge the static electricity: quickly touch the door striker.
-- Disconnect the connector -3-.