Left/Right Front Seat Belt NX10/NX11, Removing And Installing: Removing
-- Disconnect the battery ground cable. Refer to BATTERY, DISCONNECTING AND CONNECTING .
-- Remove the front sill panel. Refer to Front Sill Panel, Removing and Installing .
-- Remove the rear sill panel. Refer to Rear Sill Panel, Removing and Installing .
-- Remove the B-pillar upper trim panel. Refer to B-Pillar Upper Trim Panel, Removing and Installing .
-- Remove the B-pillar lower trim panel. Refer to B-Pillar Lower Trim Panel, Removing and Installing .
-- Remove the front belt end fitting. Refer to Front Belt End Fitting, Removing and Installing .
-- Remove the front seat belt guide. Refer to Front Seat Belt Guide, Removing and Installing .
-- Remove the bolt -1-.
-- Remove the seat belt relay -2- with the seat belt webbing.
Base Version:
Pyrotechnical components can deploy unintentionally.
Risk of injury.
- Discharge the static electricity: quickly touch the door striker.
-- Disconnect the connector -1-.
-- Remove the bolt -arrow-.
-- Remove the front three-point seat belt -2-.
Reversible Power Version:
Pyrotechnical components can deploy unintentionally.
Risk of injury.
- Discharge the static electricity: quickly touch the door striker.
-- Disconnect the connectors -1 and 2-.
-- Remove the expanding rivet -upper arrow-.
-- Remove the bolt -lower arrow-.
-- Remove the front three-point seat belt -3-.
Continuation for All Vehicles