Front Passenger Airbag Unit With Igniter, Removing And Installing: Installing
Install in the reverse order of removal while noting the following:
CAUTION:
Pyrotechnical components can deploy unintentionally.
Risk of injury.
- Discharge the static electricity: quickly touch the door striker.
-- Connect the connector -1- in the direction of -arrow A- until it audibly locks.
-- Release the connector lock -2- in the direction of -arrow B-.
-- Make sure the wire is not pinched.
-- Connect the battery ground cable. Refer to BATTERY, DISCONNECTING AND CONNECTING .
CAUTION:
Pyrotechnical components can deploy unintentionally.
Risk of injury.
- Keep as far away as possible from the pyrotechnic component when switching the ignition on.
-- Switch the ignition on.
-- Check and clear the DTC memory using the Vehicle Diagnostic Tester.