Driver/Front Passenger Thorax Airbag Crash Sensor G179/G180, Removing And Installing: Installing
Install in the reverse order of removal while noting the following:
-- Attach the connector until it clicks into place.
-- Make sure the wire is not pinched.
Conditions
- The sealing of the door must be ensured.
-- Connect the battery ground cable. Refer to BATTERY, DISCONNECTING AND CONNECTING .
CAUTION:
Pyrotechnical components can deploy unintentionally.
Risk of injury.
- Keep as far away as possible from the pyrotechnic component when switching the ignition on.
-- Switch the ignition on.
-- Check and clear the DTC memory using the Vehicle Diagnostic Tester.