Headlamp Adjustment, Checking (Sae)

Special tools and workshop equipment required

NOTE:

The designation VOL/VOR is visible on the headlamp from the exterior.

The sideways adjustment is sealed on SAE headlamps.

Angle dimension for SAE VOL LED headlamp

Angle dimension
0.7 %

VOL: visual optical aim left -1-

Fig 1: Visual Optical Aim Left -1-

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Check if the left level cut-off line contacts the dividing line -1- on the headlamp adjusting unit test surface.

Angle dimension for SAE VOR HID headlamp, LED headlamp and dynamic light assist headlamp

Angle dimension
0.0 %

VOR: visual optical aim right -2-

Fig 2: Visual Optical Aim Right -2-

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Check if the right level cut-off line contacts the dividing line -2- on the headlamp adjusting unit test surface.