Fan Shroud With Radiator Fan, Removing And Installing: Removing
-- Performing impact member service position. Refer to the appropriate Service Information .
CAUTION:
There is a risk of injury if the radiator fan turns on by itself.
- When performing procedures near the radiator maintain a distance to the radiator.
- Do not reach into the radiator fan when disconnecting the connector.
-- Disconnect the connector for the Radiator Fan -VX57- -arrow-.
For reasons of clarity, the following procedures are shown with the radiator module removed.
-- Push in the left and right retaining straps -1- for the fan shroud -2- in the -direction of the arrow A-.
-- Pull off the fan shroud -2- upward from the radiator -direction of the arrow B-.
-- Position the fan shroud -2- at an angle and remove it upward.