Glove Compartment Lamp Switch -E26-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.
-- Open the glove compartment lid -2-.
-- Push the stops -1- for the glove compartment lid -2- upward -A arrows-.
-- At the same time, open the glove compartment lid -2- further -arrow B-. While doing so, carefully remove the damping element shaft from the damper.
-- Release and disconnect the connector -2- from the Glove Compartment Lamp Switch -E26- -3-.
-- Turn the damper -1- with the Glove Compartment Lamp Switch -E26- -3- 90° (1 /4 turn) in the -direction of the arrow- and remove from the glove compartment.