Driving Profile Selection Control Head -E881-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn off the ignition and all electrical equipment.
-- Move the ignition key outside of the vehicle to prevent switching on the ignition unintentionally.
-- Remove the selector lever handle with shift cover. Refer to SELECTOR LEVER HANDLE, REMOVING AND INSTALLING .
-- Release the catches from the Driving Profile Selection Control Head -E881- -1- in the -direction of the arrow A-.
-- At the same time turn the Driving Profile Selection Control Head -E881- -1- all the way in the -direction of the arrow B-.
-- Remove the Driving Profile Selection Control Head -E881- -1- from the shift cover.