High-Mounted Brake Lamp, Removing And Installing: Installing

WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

CAUTION:

If an LED is faulty, the entire high-mounted brake lamp must be replaced.
When installing the high-mounted brake lamp, make sure the seal is seated correctly. The seal must not have any kinks and must not be damaged.
When connecting the washer fluid hose, make sure that the clip engages audibly into the connection.

-- Install the hose and connectors.

-- Push the high-mounted brake lamp in the rear lid.

-- Engage the upper hook.

-- Engage the lower springs.

-- Check the high-mounted brake lamp and the rear window washer system for correct function.