Power Rear Lid Opening Control Module -J938-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
The Rear Lid Opener Control Module -J938- is installed behind the rear bumper cover. It can be removed and installed through the trailer hitch cut-out.
-- Release and disconnect the connectors -3-.
-- Release the locking tab on the bracket -2- in the -direction of the arrow A-.
-- Pivot the Power Rear Lid Opening Control Module -J938- -1- out of the bracket -2- in the -direction of the arrow B- and remove it.