Instrument Cluster -KX2-, REMOVING AND INSTALLING, ALL-DIGITAL INSTRUMENT CLUSTER: Notes

WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Hook:T10538

Fig 1: Hook
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Torque Screwdriver:V.A.G 1624

Fig 2: Identifying Torque Screwdriver VAG1624
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Fiber-Optic Repair Set - Connector Protective Caps:VAS 6223/9 .

Fig 3: Fiber-Optic Conductor Repair Set VAS 6223A
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

CAUTION:

Do not disassemble the Instrument Cluster -KX2-.
It is not necessary to remove the steering wheel in order to remove the Instrument Cluster -KX2-.
If the Instrument Cluster - KX2- is replaced with the Instrument Cluster Control Module -J285-, select the "Replace" function for the corresponding control module in "Guided Fault Finding" or "Guided Functions" mode on the Vehicle Diagnostic Tester.